If you are looking for door fitters in Bettystown and Mornington, start by finding out whether you need new door leaves, work to the frames or a complete replacement. That distinction matters more to your quote than choosing oak or white on your first call.
East Coast Doors Ireland is based in Julianstown. Its Meath internal door fitting service lists Bettystown and Mornington. Share your address and the work you have in mind so the team can confirm availability.
This guide takes you from the first enquiry to the final walk-through, with examples of what to photograph, what to ask at the measure and how to spot gaps in a quote.
What to send door fitters in Bettystown and Mornington
Send your town or Eircode, the approximate number of internal doors and the reason you want the work done. State whether you already own the doors. Include an honest account of the renovation timeline, especially if the floor or walls are changing.
A helpful enquiry might say you have four upstairs doors and a downstairs bathroom door in Mornington. The bathroom latch sticks, and you want to see if its existing frame can stay. You prefer a white panel, and the upstairs carpet is due to be changed.
A second enquiry might say you want to replace three doors in Bettystown, including a glazed living room door, after a hall floor is fitted. You would like pricing with and without new architraves. There is an old double opening you might leave for a later phase.
The details give the installer something specific to respond to. If the quote comes back with a question about floor levels or who supplied the doors, answer that before asking for a fixed installation date.
Take photos that answer a question
Stand back far enough to show the entire opening, the floor on both sides and the neighbouring wall. For a sticking door, photograph the point where it catches. For a loose latch, photograph the strike plate where the latch enters the frame.
If the room has two doors close together, take a wider photo showing both. A fitter can then see why you are asking about the swing. Label the photos with simple room names and keep the same names when you speak to the team.
Tell the fitter if the photo predates a floor change or new plaster. A good picture of an out-of-date opening can send the conversation in the wrong direction. Save the current photos together in one folder and take them in daylight when possible.
East Coast Doors Ireland describes the areas covered and what the visit includes on its free home door measuring service page. Once you have an enquiry ready, decide whether each opening needs attention at all.
Before booking, sort repair questions from replacement questions
If one door catches and the others work well, ask what can be checked before you request a full replacement. If several doors have mismatched finishes or do not work the way you need, make a list that explains the issue at each opening.
Suppose the downstairs bathroom door has to be pulled tight for the lock to engage. The description you want is precise: the handle moves, the latch comes out, and it catches only when you pull the leaf towards you. Ask the fitter to look at how the door meets the frame.
Now suppose the living room door sits open most of the time because the hall is dark. This is a design question. Photograph the view with the door closed and again with it open. Ask if a glazed design could give you the view or borrowed light you want.
Decide what you would prefer to keep
Point out any skirting, trim and painted frames that you want to save. If you have a spare length of architrave or know the paint colour, tell the fitter. Keep replacement trim as a separately priced option when the decision depends on its condition.
Sometimes the reason to keep a frame is practical. Perhaps the hall was painted last month and you would like to avoid touching it up. Say that early. Ask the fitter to describe the work anticipated around the opening if you keep the frame and what changes if it needs replacing.
If you want the existing handles reused, keep a list by room and ask which items are suitable for the proposed doors. Agree what happens to the old hardware if new fittings are supplied. It is easy to forget to make that choice until the old doors are ready to leave.
Give special openings their own line
Mention any door identified in project paperwork as fire-resisting, any connection to an attached garage and any opening affected by an attic conversion. Ask the designer or relevant professional to confirm the requirement before you agree a replacement.
The Department of Housing publishes its fire-safety guidance for dwelling houses in Volume 2 of Technical Guidance Document B. Bring the confirmed project specification to the installer when an opening has a stated requirement.
Mention any person who finds the current handle or opening awkward. Describe the difficulty during normal use and walk the route at the visit. If the work forms part of a project with access requirements, ask the designer how they apply. The Department publishes Technical Guidance Document M on access and use.
Once you know what to keep and which openings need a separate decision, use the measuring visit to get the remaining items on paper.
During the visit, build a room-by-room door schedule
Meet the fitter at the entrance and walk the house in order. Put an opening ID beside each door on your phone or a sheet of paper. The labels can be as simple as G01 for the downstairs WC and F01 for the first bedroom.
Ask the fitter to confirm what is being measured. Explain whether you want a replacement leaf for an existing frame, or new work at the opening. Give the fitter time to look at the frame, check the way the door sits and discuss any unexpected dimensions.
The schedule should explain the decision in ordinary language. For example, G01 may say white panel, retain frame if suitable, fit privacy lock, and confirm clearance after tiling. F01 may say white panel, replace damaged trim on both sides, and retain the existing handle if suitable.
A schedule is also useful when you need a second opinion. Send the same rows to each company and ask where they propose a different solution. The guide to what happens at a home measuring visit gives you a starting point for preparing your rooms.
Discuss the swing with the door open
Stand inside the room and open the door to the position you use most. Look for a radiator, cabinet, light switch or another door in the path. If you want to change the hinge side or swing direction, point to where you want the handle when the door is closed.
Walk through as you would on a busy morning. Carry a basket or move a chair past the door if that reflects normal use. A swing that looks fine on a sketch can feel awkward when someone is using the hall. Note your preference and ask for it to be confirmed on the schedule.
Agree how the fitter records handing. People can use different viewpoints when they describe left and right. A small sketch showing the room, hinge side and swing direction gives you something to check when approving the order.
Explain the floor and finishing sequence
Show where flooring ends and starts, including rooms that will keep their old finish. Point out a threshold or carpet that is due to change. If you are ordering carpet, explain whether the fitter will be measuring before or after it goes down and who will confirm the level.
For unfinished plaster, ask which surfaces need to be ready before the fitter works. If you are choosing primed doors, ask the decorator when they want to paint them. Work out who is responsible for finishing after fitting and record it on the schedule.
If two rooms meet at a glazed door, decide which floor and trim you want people to notice from the hall. Choose hardware and glass after you have seen samples together. The East Coast Doors installation gallery gives you references to discuss during the visit.
A good survey leaves you with enough detail to tell whether a price is complete. Read the quote against the schedule before deciding which installer to book.
At quote stage, compare what you will receive
Lay two quotes beside your room schedule. Read them by opening first and price second. When one says a door is supplied and fitted, look for a model, finish, hardware and a note about the frame. Ask whether the price includes handling old doors and trim.
| Quote detail | Question to ask | Where to record the answer |
|---|---|---|
| Door model and finish | Is this the sample and glazing we chose? | Each opening or a common finish note |
| Frame and architrave | Are both sides of the opening included where needed? | The affected door row |
| Hardware | Which hinges, handles, latches and locks are included? | Door row or hardware schedule |
| Decoration | Who paints, touches up and makes good the trim? | Inclusions and exclusions |
| Removal | Who takes away leaves, hardware and old trim? | Waste and handover |
| Payment and timing | What is the total payable and when is each payment due? | Written terms |
The table is a conversation starter. When the fitter replies, have the revised details added to the current quote. Keep the older version if the scope changed so you can explain the difference later.
Work out whether you want supply and fit or fitting only
If you already bought a door, send its exact model, dimensions and condition. Photograph the packaging and the opening. Ask the installer whether they take fitting-only work and what they need to check before saying that the door will work.
If you want one team to source and install the doors, ask for the precise scope rather than relying on the package name. East Coast Doors Ireland explains the difference in its supply and fit internal doors guide.
Ask who handles the next step if the measured opening and the selected model turn out to be incompatible. You want clarity on whether the product is changed, the frame scope is revised or the opening is taken out of the order.
Agree the total and the changes process in writing
Ask for the total payable, the deposit terms and what triggers later payments. If VAT applies, check that you understand whether it is included. Put the planned work and exclusions in writing, along with how you approve a change after the job begins.
The Competition and Consumer Protection Commission explains what to check when comparing quotes, contracts and deposits for home improvement work. For general cost categories, compare the Irish internal door fitting cost guide.
Where you need work by a specific date, say why. Perhaps a painter is booked, or you need the downstairs WC usable for visitors. Ask which dates are confirmed and which depend on materials, the work of another trade or measurements.
Make a priority list if the quote covers several rooms
Put a mark beside any opening that is stopping you from using a room as intended. One household might put the bathroom first because the latch is unreliable. Another might want the office done before a change to home working. Explain the priority to the installer so they can discuss a sensible order.
Next, mark the openings that are connected by finish or timing. Two doors facing each other on the landing may be worth discussing together if you want matching panels and handles. A door at the edge of a new kitchen floor may depend on information from a different trade. Those connections matter when a larger job is split into stages.
Ask for the quotation in a form you could explain to someone who missed the survey. You should be able to point to a room, find the proposed work and show where a choice still needs to be made. If a single figure covers several rooms, ask for a schedule alongside it.
Keep your sample choice attached to the order
Photograph the sample beside its label. If you saw several similar shades of white or oak, write the selected finish on the quote and circle it on the brochure. Do the same for glass and handles. A photo without a label can be hard to match to a product later.
If you change your mind about a finish, send the update with the opening IDs affected. Ask for written confirmation of the revised selection and whether it changes the price or timing. Keep the original decision and new confirmation together so the installer can trace which product should arrive for each room.
Once the quote and proposed timing make sense together, work backwards from fitting day to get the house ready.
Three sample projects and the questions they raise
These examples show how the same enquiry changes with the house and the work involved. Use the one closest to your project to check whether your brief gives the fitter enough detail.
A Bettystown landing with five white doors
Imagine three bedrooms, a bathroom and a hot press on one landing. You want all five doors to look related from the stairs. The bathroom needs a privacy lock, the hot press uses different hardware and the main bedroom frame is the only one you suspect needs work.
Ask for the product finish to be stated once and for the exceptions to be shown by opening. For the hot press, decide whether you want it included in the order or simply painted to match. Mark its actual use and let the fitter confirm what needs checking before any change.
Have a look at the white internal door styles guide before choosing samples. When you see them at home, compare the white of the door with the landing paint and the trim you intend to keep. Try the comparison in daylight and with the hall light on.
A Mornington kitchen renovation with a glazed opening
Picture a kitchen that will get a new floor and a glazed door to the hall. The kitchen supplier wants the doorway ready before a cabinet is delivered. The flooring installer still has to confirm the transition at the hall. Your fitter needs both details before finalising the job.
Send the door swing and cabinet position to the kitchen planner, then ask the flooring installer to mark the intended floor line on the sketch. Agree who updates the measurements if the kitchen layout or flooring changes. Keep the changes with the same quote version.
If you want light from the kitchen, compare sample glass from the hall after dark as well as during the day. Consider what you want visible from the front door. The internal glazed door design guide gives you starting points to discuss at the measure.
A phased refresh while your family stays at home
Suppose the old handles bother you everywhere, but only the office and living room doors need immediate replacement. Put those two openings in the first phase. Ask for a separate option for handles on doors you intend to keep, subject to compatibility.
If you would like matching doors later, ask which product codes and finish references to save. Check how you will handle any future difference in the available range. Give the installer a clear line between the current job and the work you are considering later.
Ask the installer what needs to be moved from each room and when you will be able to use it again. If you need the office by a certain hour, arrange a backup location for calls. Set the order around your household’s real constraints.
Ask who will own each decision
For each of these projects, write three names or roles on the schedule: who confirms the opening, who approves the product and who deals with the finish around it. Sometimes the same team covers several items. If a separate painter or builder is involved, give each person the same latest plan.
When you get an invoice or request for payment, check it against the agreed stage and scope. The CCPC explains how to document a deposit and what to confirm before paying. Keep a copy of the terms with the related quote.
Once each responsibility has an owner, the pre-fitting conversation can focus on access and how the household will work during installation.
The week before fitting, line up the house and the trades
Ask the fitter what access, space and power they need. Clear the route from the unloading area to the rooms. If the landing is narrow or the route turns sharply by the stairs, send a photo so the installer can plan how to bring the leaves upstairs.
Tell the installer about parking restrictions and the easiest approach to the house. If an address is harder to locate by the estate name alone, include the Eircode in the appointment details. Agree who will be there to give access and answer questions.
Ask whether the work area will be inside or outside and which rooms may be unavailable. Make a plan for pets, children and anyone working at home. Agree where keys and reusable hardware go if you will be away during part of the installation.
Keep one list for the floor, fitter and painter
Give each trade the same room names and the latest finish decisions. If carpet is being installed after the doors, share the carpet and underlay specification with the fitter and ask who confirms the intended clearance. If flooring is fitted first, ask about protection during the door work.
Check what the painter expects to see after new architraves go in. Show an example of the existing trim finish if you want it matched. Agree who handles small areas of wall or skirting touched by the work and when that will happen.
For an occupied home, ask which rooms can be completed first. A family might choose to start with upstairs bedrooms or preserve use of the downstairs WC until later. Share those constraints ahead of the visit so they can be considered in the work plan.
Handle a surprise as a new scope decision
An example is an architrave removed to reveal damage that was covered at the survey. Ask the fitter to show the affected area, explain the revised work and tell you the cost and timing before proceeding. Keep the change tied to the same opening ID.
If a product needs substituting, compare the proposed replacement with the original model, finish, hardware and any relevant specification. Ask to see a sample or datasheet if the difference matters. Update the order record before the replacement is brought to site.
For a broader look at what can happen during the work, refer to the internal door installation guide. The final part of the job is walking the openings with the installer.
At handover, use each door before you sign off
Start at the first opening and work through the schedule. Close each door from both sides, try the handle and check how it latches. Test privacy hardware as agreed with the installer. Open each door across the floor transition and check the position when it is open.
Stand back from doors that share a landing. Look at handle alignment, the agreed finish and trim on both sides. If a decorating item is scheduled for another trade, separate it from any issue you want the fitter to address.
For a problem, record what you saw rather than trying to diagnose it. For example, the bedroom latch catches only when you lift the handle side of the door, or the WC door touches the floor close to the end of its swing. Add the opening ID and show the installer.
Put the handover details in one place
Keep the quote, agreed variations, invoice, product details and care information together. If the job includes work still to be completed, agree the exact item, who owns it and when you will hear back. A photo is helpful when it shows the same opening as the written note.
Ask which contact to use if something changes after handover. If the completed work does not match what was agreed, the Competition and Consumer Protection Commission sets out how to raise home improvement disputes with a tradesperson.
That walk-through finishes the practical sequence. The following questions cover decisions people often need to make before they can book it.
Frequently asked questions
Does East Coast Doors Ireland cover both Bettystown and Mornington?
Both towns appear on the company’s Meath service area list. Send your address or Eircode and describe the work so the team can confirm current fitting availability and which visit makes sense for your project.
Can I start with one interior door?
Yes, you can ask about a single opening. State the room, current issue and whether the frame or hardware should stay. The published home measuring service covers enquiries for individual doors as well as larger projects.
Can I keep the existing frame and architrave?
Ask for an on-site assessment. The fitter can check condition, dimensions, hardware positions and clearance. Get the quote to identify where trim and frames stay, where work is needed and who will make good around them.
Can a fitter install doors I have already purchased?
Ask the fitter directly about fitting-only work. Send the model details, the measurements from the packaging and photos of the opening. Agree who handles suitability, missing hardware or any replacement needed before the fitting date.
Should I book before or after new flooring?
Speak to both trades while you are planning. The fitter needs to know the proposed finished floor level and any transitions. Agree when measurements will be confirmed and who is responsible for communicating changes.
What should my fitted door quote include?
Look for the model and finish, hardware, fitting, frame and trim work, decoration, old door removal and the total payable. Ask for written payment and scheduling terms, with any exclusions clearly tied to the work discussed.
Bring your door list and any unanswered questions into the enquiry so the measure can focus on the decisions you still have to make.
Book a local measure with a clear brief
The best first conversation with door fitters in Bettystown and Mornington starts with a few photographs, a realistic count and a description of what you want to change. Mark any door you hope to retain and any opening affected by new flooring or a specialist requirement.
East Coast Doors Ireland can discuss a home measure and a supply-and-fit quote for your address. Start with the door you most want to improve, then use the visit to put the rest of the project in order.
